CENTRIC
More Information for CENTRIC 22733090L
{Alternate Inventory Numbers: 227.33090L}
Continue Shopping
 
CENTRIC 22733090L  
Add to Cart to See Price
Price
Core
Pack
Total
CENTRIC 22733090Lclose
<
>
Part image
Sold Individually
CENTRIC 22733090L Specifications
ABS Sensor Ring IncludedNo
Bearings IncludedNo
Center Hole Diameter (IN)3.350
Center Hole Diameter (MM)85.100
Disc MountingFloating
Discard Thickness (IN)1.260
Discard Thickness (MM)32.000
Mounting Bolt Hole Circle Diameter (IN)5.118
Mounting Bolt Hole Circle Diameter (MM)130.000
Nominal Thickness (IN)1.335
Nominal Thickness (MM)33.900
Outside Diameter (IN)13.780
Outside Diameter (MM)350.000
Overall Height (IN)2.709
Overall Height (MM)68.800
Solid Or Vented Type RotorVented
Stud/Lug Hole Diameter (IN)0.610
Stud/Lug Hole Diameter (MM)15.500
Stud/Lug Hole Quantity5
Surface TypeSlotted X Drilled
Vane StyleCurved
C-TEK; Sport Drilled/Slotted
Centric C-TEK Drilled & Slotted Rotors provide added bite and improved looks. Zinc coating provides improved protection from corrosion extending service life.

Features & Benefits:
  • Drilled & Slotted for increased bite and better performance
  • Non-Directional Finishes
  • Machined non-friction surfaces
  • G11 metallurgy
  • Zinc coated for corrosion protection

Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function



Attention California Customers - https://www.p65warnings.ca.gov/


Attention California Customers - WARNING: Cancer and Reproductive Harm


CENTRIC Warranty Information:
90 days/3,000 miles