FVP
More Information for FVP 2028170
Continue Shopping
 
FVP 2028170close
<
>
Part image
FVP 2028170 Specifications
Bypass Diameter1.09 in
Bypass Length1.40 IN
Flange Thickness0.06 in
Gasket or Seal IncludedNo
Installation Tool IncludedNo
Jiggle Pin Weep HoleYes
Sealing Flange Outside Diameter2.12 IN
Temperature (Degree F)170
High Flow

The wider opening of FVP's High Flow Thermostat allows up to 50% more coolant flow. This causes a reduction in engine warm up times, allows trapped air in the cooling system to escape, and stabilizes the pressure of the cooling system overall.

Features & Benefits:
  • Made of stainless steel with enlarged openings to provide increased flow
  • Triple-bridge design increases strength, stability and reliability
  • Jiggle valve removes air pockets
  • Bypass valve allows a small amount of coolant to circulate before fully opening.
Which Thermostat Is Right For You?

Type Lifespan Flow Rate Precise Temperature Control Fail-Safe Engine Protection
Economy
Standard Replacement
★★ ★★
Performance
★★ ★★ ★★
Heavy Duty ★★★ ★★ ★★★
Premium
★★ ★★
What Temperature Thermostat Do I Need?

Thermostats have a “rated” temperature (such as 180F or 195F). This is the temperature the thermostat will start to open, releasing heated coolant from the engine into the radiator. The thermostat will fully open once the coolant gets another ten or fifteen degrees warmer.

OE TEMPERATURE

These thermostats match the OEM-specified temperature rating for the vehicle. Manufacturers recommend an OE temperature thermostat for most engines, especially for:

  • Modern engines with computers that use the coolant temperature to help control the fuel, emissions and other important systems

ALTERNATE TEMPERATURE

These thermostats have a temperature rating below (cooler than) the OEM-specified temperature rating for the vehicle. This option may make sense for use in:

  • Modified Engines
  • Performance Applications
  • Older / Classic Vehicles
Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

  • Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
  • Consider replacing the Radiator Hoses (and Hose Clamps) and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
  • Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
OEM / Interchange Numbers: 212000C811, 2120040F00, 2120053J00, 2120053J10

Warranty Information:
Limited Lifetime