DENSO
More Information for DENSO 4770771
{Alternate Inventory Numbers: 477-0771}
Continue Shopping
 
DENSO 4770771  
$75.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$75.79
Total
DENSO 4770771close
Part image
DENSO 4770771 Specifications
Includes DrierNo
Mounting Hardware IncludedNo

Features & Benefits

  • First Time FitŪ assures bolt-in replacement; no brackets or adapters required
  • Unique fin design minimizes airflow blockage
  • Reduces required compressor power, resulting in improved fuel economy and restores A/C performance to as-new condition
  • Zinc diffusion layer improves corrosion resistance
Benefits of Additional Corrosion Protection

Aluminum doesn't rust but can corrode, especially when exposed to road salt and other elements on the front of a vehicle. Corrosion is an insulator, reducing a condenser's heat exchange capacity and putting extra wear on the A/C Compressor and other components. Corrosion may cause a puncture, venting environmentally harmful refrigerant into the air and requiring an expensive repair and recharge. A condenser with Additional Corrosion Protection extends the lifespan of the whole A/C system!

Installation Tips
  • Old Refrigerant must be removed from the system in accordance with local, state, and federal laws.
  • Replace the A/C System O-Rings / Seals connected to the A/C Condenser to prevent a Refrigerant leak.
  • If the new A/C Condenser does not have an integrated drier, replace the A/C Receiver Drier / Accumulator as well. After opening your A/C System, this part becomes saturated with moisture and needs to be replaced.
  • After installing the new A/C Condenser, evacuate the system for at least 45 minutes to remove any moisture. Make sure it holds vacuum for at least 5 minutes. If it does not, you may have a leak in the system. Find the leaking component and repair or replace it.
  • Recharge the system with the correct amount and type of Refrigerant as specified in your Owner's Manual.
OEM / Interchange Numbers: 20913751

Warranty Information:
12 Months