AUTOTECNICA
More Information for AUTOTECNICA TY0715902PRM
{Alternate Inventory Numbers: TY0715902-PRM}
Continue Shopping
 
AUTOTECNICA TY0715902PRM  
$22.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$22.79
Total
AUTOTECNICA TY0715902PRMclose
<
>
Part image
AUTOTECNICA TY0715902PRM Specifications
Air Vent (Bleeder Valve) IncludedNo
Base Width (IN)3.465 in
Bolt Hole Center To Bolt Hole Center72 mm
Bolt Hole Diameter (IN)0.282 in
Center Bore Diameter (IN)1.295 in
ColorNatural Aluminum
Flange Diameter (IN)3.463 In
Flange Length (IN)0.393 IN
Flange Thickness9.23 MM
Flange Width (IN)3.463 In
Gasket MaterialEPDM
Gasket or Seal IncludedYes
Hardware IncludedNo
Height110 mm
Housing Neck Angle (Deg)45 De
Inlet Port Diameter33 mm
MaterialA384
Mounting Hole Diameter7 mm
Mounting Hole Quantity3
Number of Bolt Holes3
Number Of Outlet Ports1
Outlet Port Diameter1.3 IN
Temperature (Deg F)179.6 De
Thermostat IncludedYes
Assembly; Aluminum Construction
Features & Benefits:
  • Durable surface finish resists corrosion
  • High-flow OE-style design for optimal engine cooling performance
  • High-quality alloy or composite material is temperature-stable to resist warping or cracking that can lead to coolant leakage
  • High-strength alloy construction withstands brutal engine heat and vibration
  • Includes temperature sensor ports where applicable
  • Made from high strength aluminum vs plastic OEM
  • Thermostat housing assembly is manufactured to factory housing dimensions for easy bolt-on installation and reliable hose connections
Which Thermostat Is Right For You?

Type Lifespan Flow Rate Precise Temperature Control Fail-Safe Engine Protection
Economy
Standard Replacement
★★ ★★
Performance
★★ ★★ ★★
Heavy Duty ★★★ ★★ ★★★
Premium
★★ ★★
What Temperature Thermostat Do I Need?

Thermostats have a “rated” temperature (such as 180F or 195F). This is the temperature the thermostat will start to open, releasing heated coolant from the engine into the radiator. The thermostat will fully open once the coolant gets another ten or fifteen degrees warmer.

OE TEMPERATURE

These thermostats match the OEM-specified temperature rating for the vehicle. Manufacturers recommend an OE temperature thermostat for most engines, especially for:

  • Modern engines with computers that use the coolant temperature to help control the fuel, emissions and other important systems

ALTERNATE TEMPERATURE

These thermostats have a temperature rating below (cooler than) the OEM-specified temperature rating for the vehicle. This option may make sense for use in:

  • Modified Engines
  • Performance Applications
  • Older / Classic Vehicles
Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

  • Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
  • Consider replacing the Radiator Hoses (and Hose Clamps) and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
  • Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.

Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

OEM / Interchange Numbers: 160310S010, 1603138010

Warranty Information:
24 Months