Standard® is the premier professional engine management brand in the automotive aftermarket today. Standard leads the way in advanced automotive technology with more than 40,000 products for complete vehicle coverage.
Features & Benefits:
Their newly manufactured mass air flow sensors provide your vehicle's ECU with accurate air flow readings, which are required to balance and deliver the correct air/fuel ratio to the engine in order to achieve clean burns.
Each of their mass air flow sensors is 100% newly manufactured to offer a better alternative to remanufactured sensors, which often contain left over debris contamination that ultimately leads to sensor failure.
Every one of their sensors is manufactured to strict OE specifications to ensure the part you receive will outperform other air flow sensors found in the aftermarket.
This sensor has been put through a variety of durability and environmental tests to ensure it provides maximum performance under the harshest driving conditions.
Check for Vacuum Leaks First!
Vacuum leaks present symptoms similar to a faulty MAF Sensor. When replacing the MAF, always check for vacuum leaks, too. Common sources include:
Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
Cracked Intake Boot (found in the "Engine" category)