Get the GM quality you know and trust with ACDelco's GM Original Equipment Water Pump line. Stay with the brand of parts your GM vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors.
Features & Benefits
Manufactured to GM OE specification for fit, form, and function
Offering the quality, reliability, and durability of GM OE
GM-recommended replacement part for your GM vehicle's original factory component
Thoroughly tested for reliable, leak-free performance
Tips for Water Pump Servicing & Installation:
Clean and reinstall the coolant recovery reservoir before flushing the cooling system.
Flush the cooling system completely, using power flush equipment or thermal cycling the system with clean water three times. The most effective method of system flushing is to use a coolant exchanger, following the manufacturer's operating instructions.
Do not use any non-approved flush agents, and replace the coolant according to manufacturer's specifications.
Clean all sealing surfaces, and make sure all old gasket material is removed before installing your replacement component.
Never strike the water pump shaft, since this will damage the new water pump.
Torque all bolts according to the manufacturer's specifications, and adjust belts to proper tension (if applicable) to manufacturer's specifications.
Use sealant tabs only if recommended. Some sealant tabs or similar compounds may restrict coolant flow through the passages of some cooling systems.
With the new pump installed, turn the hub by hand and check for rotation.
After installation, pressure-test the system for leaks and check for sufficient fan blade clearance between the blade and radiator shroud.
Inspect related components in the cooling system, including your fan blades, fan clutch, engine mounts, radiator, belts and hoses, and reservoir.
