|
DURAGO BD92010402
|
|
$54.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$54.79
Total
|
|
|
|
|
|
| DURAGO BD92010402 Specifications |
|---|
| Abs Tone Ring Included | No | | Bolt Circle Diameter (IN) | 5.5 | | Bolt Circle Diameter (MM) | 139.7 | | Bolt Hole Diameter (IN) | 0.57 | | Bolt Hole Diameter (MM) | 14.4 | | Bolt Hole Quantity | 6 | | Brake Surface Width (IN) | 2.43 | | Brake Surface Width (MM) | 61.7 | | Center Hole Diameter (IN) | 4.25 | | Center Hole Diameter (MM) | 108 | | Construction | Full Cast | | Material | Cast Iron | | Maximum Brake Diameter (Discard) (IN) | 10.08 | | Maximum Brake Diameter (Discard) (MM) | 256 | | Nominal Drum Diameter (IN) | 10 | | Nominal Drum Diameter (MM) | 254 | | Outer Cooling Fins | No | | Outside Diameter (IN) | 12.05 | | Outside Diameter (MM) | 306 | | Overall Height (IN) | 2.89 | | Overall Height (MM) | 73.3 | | Rust Resistant Coating | Yes |
|
|
DuraGo Electrophoretic Brake Drums are thoroughly coated. Unlike a sprayed on paint, the Drum is fully immersed in a tank and coated by the process of Electrophoretic deposition. During this process, resin particles are suspended within a liquid medium and have a charged placed upon them. Under a charged current, the coating particles migrate to the Drum and are deposited onto all exposed surfaces, resulting in a highly corrosion resistant, durable coating.
Features & Benefits:
- Electrophoretic coating is bonded to the drum for increased protection against rust and corrosion
- Dynamic black finish complements open wheel designs
- Enhanced Ra braking surface finish supports brake shoe bedding
- Tested for balance on advanced balancing testing machines prior to packaging
|
DURAGO Warranty Information:12 months/12,000 miles |
|
