|
BREMBO 09A81811
|
|
$70.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$70.79
Total
|
|
|
|
|
|
| BREMBO 09A81811 Specifications |
|---|
| Center Hole Diameter (mm) | 67.00 | | Fixing Screws | Included | | Material | High Carbon Cast Iron | | Minimum Thickness (mm) | 21.4 | | Nominal Thickness (mm) | 24.00 | | Number of Holes | 5 | | Outside Diameter (mm) | 320.00 | | Overall Height (mm) | 585.00 | | Rust Resistant Coating | Yes | | Solid Or Vented Type Rotor | Vented | | Torque Spec(NM) | 150 |
|
|
Designed and manufactured with the same engineering rigor found in Brembo's original equipment for the world's leading automakers, these rotors ensure consistent stopping power, smooth operation, and long-lasting reliability. Precision balancing and tight manufacturing tolerances minimize runout and vibration, promoting smooth and confident braking performance. Brembo rotors undergo strict electronic testing and quality control to ensure perfect balance and reliability right out of the box, delivering the craftsmanship, confidence, and comfort expected from the global leader in braking systems
Features & Benefits:
- ELEVATED CARBON CONTENT: Optimized metallurgy increases strength and heat dissipation while reducing vibration, helping prevent runout and deliver reliable, fade-resistant braking performance
- VENTED COOLING: OE-based vane design promotes effective heat dissipation and consistent braking, ensuring thermal stability and dependable operation
- OE REPLACEMENT: Meets or exceeds OE specs with precise fit, consistent braking, Brembo-certified quality, and ECE R-90 compliance. Rotors are electronically tested for perfect balance out of the box
 Installation Tips - Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
|
| OEM / Interchange Numbers: 2214230412, 2214231012, A2214230412, A2214231012 |
BREMBO Warranty Information:24 Months/24,000 Miles |
|
