More Information for CENTRIC 50011140
Continue Shopping
CENTRIC 50011140  
CENTRIC 50011140close
Part image
Brake Pads are sold as a set. Quantity of one (1) is for both wheels
CENTRIC 50011140 Specifications
Friction Material Bonding TypeIntegrally Molded
Friction Material CompositionCeramic
Inner Pad Height (IN)1.461
Inner Pad Height (MM)37.100
Inner Pad Width (IN)4.350
Inner Pad Width (MM)110.500
Mounting Hardware IncludedYes
Notes1 Pad with 1 Wear Sensor
Outer Pad Height (IN)1.461
Outer Pad Height (MM)37.100
Outer Pad Width (IN)4.350
Outer Pad Width (MM)110.500
Pad Quantity4
Pad Shims IncludedYes
Pad Wear Sensor IncludedYes
Prepared For Pad Wear SensorYes
Centric PQ (Posi Quiet) PRO brake pads feature advanced friction formulations engineered to meet the exacting needs of demanding applications. This innovative and advanced friction line has been developed to address key issues such as brake fade, weak braking response, and excessive noise that many pads face when paired with rotors coated with anti-corrosion compounds. PQ PRO brake pads quickly and efficiently remove the rotor coating without damaging the rotor braking surface underneath while preparing the rotor surface to accept the delivery of the crucial friction transfer film layer required to optimize your braking experience.

Features & Benefits:
  • Designed specifically to be used with anti-corrosion coated rotors
  • Application-specific friction compounds are engineered to exceed original performance specifications, ensuring reliable stopping power
  • Pads are enhanced with a Mu500 friction coating that provides an immediate increase in Mu (stopping power) right out of the box and eliminates time consuming break-in procedures
  • Advanced multi-layer shims are employed to eliminate noise
  • Ultra-low dust formulas are used to ensure clean wheels

Installation Tips
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function


Product Highlight: Centric PQ Pro Brake Pads

Attention California Customers -

Attention California Customers - WARNING: Cancer and Reproductive Harm

Alternate/OEM Part Number(s): 500.11140, 500-11140

CENTRIC Warranty Information:
90 days/3,000 miles