More Information for DYNAMIC FRICTION 60054008
Continue Shopping
 
DYNAMIC FRICTION 60054008  
$51.79
Price
$0.00
Core
$51.79
Total
(Only 2 Remaining)
DYNAMIC FRICTION 60054008close
<
>
Part image
DYNAMIC FRICTION 60054008 Specifications
Bolt Hole Diameter (MM)1/2-20
Bolt Hole Quantity5
Discard Thickness (MM)22.23
Height (MM)107.5
Inside Diameter (MM)61.7
Nominal Thickness (MM)23.88
Outside Diameter (MM)287
Solid Or Vented Type RotorVented
Formulated with the G3000/G11H18 cast iron specification, Dynamic Friction Rotors are engineered to match OEM specifications for durability, reliability, and stability.

Features & Benefits:
  • Engineered with premium G3000/G11H18 iron castings for strength, stability, and durability
  • Original Equipment (OE) vane configuration to ensure proper and maximum heat dissipation
  • CNC-machined to the tightest tolerances
  • 100% precision mill-balanced for smoother stopping and zero vibration at any speed
  • Non-directional finish to promote faster break-in and smoother stops
  • Designed to meet the same form, fit, and function as OEM rotors
  • Quality tested to ensure long-lasting performance

Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function



Videos

Additional Information About DFC Rotors

Attention California Customers - This product contains Antimony Oxide and other chemicals which is known in the State of California to cause cancer (or reproductive problems).

Alternate/OEM Part Number(s): 600-54008

DYNAMIC FRICTION Warranty Information:
12 months/12,000 miles