Brake Pads are sold as a set. Quantity of one (1) is for both wheels
DYNAMIC FRICTION 1214037001 Specifications
FMSI Number
7721-D845
Friction Material Attachment
Integrally Molded
Friction Material Composition
Semi-Metallic
Inner Pad Height
3.37 IN
Inner Pad Overall Thickness
0.669 IN
Inner Pad Width
4.921 IN
Mounting Hardware Included
Yes
Outer Pad Height
2.319 IN
Outer Pad Overall Thickness
0.614 IN
Outer Pad Width
5.799 IN
Pad Wear Sensor Included
Yes
Pad Wear Sensor Type
Mechanical
Prepared For Pad Wear Sensor
Yes
Heavy Duty Pads and Hardware Kit; Integrally Molded
Features & Benefits:
Delivers Strong, Predictable Friction Level Regardless Of Temperature, Speed Or Axle Load
Engineered To Withstand Extremely High Operating Temperature Ranges
Extreme Braking Environments, High Speed, Heavy Traffic, Steep Gradients, Towing, Or Off-Roading
Low Dust
Low Noise
Rotor Friendly
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - This product contains Antimony Oxide and other chemicals which is known in the State of California to cause cancer ( or reproductive problems). See www.p65warnings.ca.gov
DYNAMIC FRICTION Warranty Information:12 months/12,000 miles
Installation Tips
