TYC
More Information for TYC 152019A
{Alternate Inventory Numbers: 152019-A}
Continue Shopping
 
TYC 152019A  
$23.79
Price
$0.00
Core
$23.79
Total
TYC 152019Aclose
<
>
Part image
TYC 152019A Specifications
Accessories IncludedYes
Connector Pins Qty On Main Connector2 Pins
GPH (Gallons Per Hour Flow)63.4-72.7
Maximum Air Pressure94-130.5
Strainer IncludedYes
CRQ Premium Electric Fuel Pump
TYC's Commitment to Quality
  • Design: All TYC products are meticulously designed using the most advanced simulation software and tooling development technology.
  • Processes: The latest technologies are used in the creation of all TYC products.
  • Vehicle Test Fit: Prototypes are created and mounted onto a vehicle. Any adjustment needed is made prior to market release to ensure drop-in, hassle-free installation.
  • Accelerated Fatigue Test: An array of tests is conducted to assure top-notch quality products. Fatigue tests, such as abrasion, humidity, rain, salt spray, and vibration are applied to meet or exceed DOT/SAE and industry standards.
Product Features:
  • Pump design improves the flow rate over the original to ensure sufficient fuel overcomes the resistance that may be present in older vehicles' fuel delivery tubes.
  • Full individual testing for functionality before leaving the factory
  • Exhaustive testing that includes SAE 1537 compliance, which considers durability, noise, and simulated contaminated fuel with granules.

Prevent Premature Fuel Pump Failure

Preventing premature fuel pump failure is far less expensive and time consuming than continuing to replace the pump. There are three common causes for premature fuel pump failure:

ELECTRICAL ISSUES
Poor electrical connections will mimic symptoms of a failed pump, sometimes resulting in unnecessary replacement. Before replacing the pump:
  • Use a Fuel System Tester to test pump pressure is within expected range
  • Use an Electrical Tester to test for bad wiring, burnt or corroded connectors
  • Check / Replace faulty Fuse(s) and Relay

BEFORE REPLACEMENT

FUEL CONTAMINATION
Dirt, rust or debris in the fuel can clog strainers and stick to internal pump components. When replacing the pump:
  • Replace Fuel Filter or Fuel Strainer
  • Empty and clean the tank with Fuel Tank Cleaner
  • Fill tank with fresh, uncontaminated fuel of appropriate grade

DURING REPLACEMENT

PUMP DAMAGE / OVERHEATING
Running low on gas causes your fuel to heat up quicker, and your pump to work harder. After replacing the pump:
  • Maintain at least 1/4 tank of fuel and use a Fuel Additive / Conditioner to keep pump cool and lubricated
  • If vehicle is stored without use, drain tank to prevent pump corrosion from fuel oxidation

AFTER REPLACEMENT





Not All Fuel Pumps Are Created Equal!

Tom's Story Learn the difference between the high quality fuel pumps that RockAuto carries, versus the remarkably cheap, low quality fuel pumps offered by some competitors in the marketplace.

Read Now

OEM / Interchange Numbers: YW4Z9H307BB

TYC Warranty Information:
Limited Lifetime for non-commercial use
Warranty Details