|
CARDONE 669778
|
|
$80.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$80.79
Total
|
|
|
|
|
|
| CARDONE 669778 Specifications |
|---|
| Abs Tone Ring Included | Yes | | ABS Tone Ring Tooth Quantity | 44 | | Axle Nut Included | Yes | | Axle Nut Socket Size | 0.504 in | | Axle Nut Socket Size | 12.8 MM | | Axle Nut Thread Size | M10x1.5 | | Axle Nut Type | Hex | | Boot Color | Black | | Boot Material | Neoprene | | Boot Rib Quantity | 5 | | CV Joints Included | Yes | | Compressed Length | 748 mm | | Compressed Length | 29.449 in | | Dynamic Damper Attached | No | | Inboard Joint Type | Splined | | Inboard Spline Quantity | 26 | | Mount Type | Spline | | Outboard Joint Type | Splined | | Outboard Spline Quantity | 36 | | Shaft Diameter | 25 mm | | Shaft Diameter | 0.984 in | | Shaft Material | Steel | | Slip Yoke | No |
|
|
CARDONE's extensive experience in testing and engineering CV Drive Axles leads to products that meet and even exceed O.E. performance. Through research into why original CVs typically fail, CARDONE has designed new solutions to avoid repeat failure. For example, their Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and ozone cracking - the leading cause of boot failure. Additionally, all CV Drive Axle shafts are individually verified for straightness, resulting in vibration-free performance at all speeds.
Features & Benefits:
- Proprietary engineering processes ensure that all CV Drive Axles meet O.E. form, fit and function
- Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and cracking, which is the leading cause of boot failure
- A new axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped
- CV Drive Axle measurements are validated after assembly to ensure a proper fit
- Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing
- High-quality grease withstands high-temperature and high-torque demands to ensure long-lasting, reliable performance
- Splines are precision rolled to ensure proper fit of CV Drive Axle into the mating hub and transmission, which eliminates installation hassles
- Threads are precision rolled to ensure proper fit when axle nut is installed
- Transmission seal diameter is precision-machined after heat treatment to ensure correct surface finish, promoting long seal life
Installation Tip: If the part comes with an ABS Ring, but your vehicle does not have ABS, you may leave the ring in place if it does not interfere with installation.
|
| OEM / Interchange Numbers: 36000156, 36000931 |
|
