Brake Pads are sold as a set. Quantity of one (1) is for both wheels
RAYBESTOS SGD465A Specifications
Friction Material
Organic
Friction Material Attachment Type
Integrally Molded
Friction Material Slot Type
Slotted
Mounting Hardware
Not Included
Pad Assembly Thickness, Inner Overall (IN)
0.230
Pad Assembly Thickness, Outer Overall (IN)
0.230
Pad Chamfered
No
Pad Shim Attachment Type
Unattached
Pad Shims Attached
No
Pad Shims Included
Yes
Pad Wear Sensor Attached
No
Pad Wear Sensor Included
No
Plate Height, Inner (IN)
1.870
Plate Height, Outer (IN)
1.870
Plate Length, Inner (IN)
5.430
Plate Length, Outer (IN)
5.430
Service Grade
Raybestos Service Grade brake pads are an affordable line of quality friction.
Features:
Safe, dependable stopping power
Slots and chamfers match OE design, allowing braking gasses to escape and helping to reduce noise, vibration and harshness
Include a noise-dampening steel shim
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - Warning: This product can expose you to chemicals including silica, which is known to the state of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.