Go to RockAuto Home Page
More Information for FRAM TG4386
Continue Shopping
FRAM TG4386close
Part image
Tough Guard; Spin-On
Tough Guard is the ideal filter for drivers who have high mileage vehicles or push their vehicles in stop-and-go traffic, towing and extreme weather conditions. FRAM's re-engineered Synthetic-Blend filter media provides premium engine protection for your vehicle.

Features & Benefits:

  1. SureGrip: Provides non slip surface for easier installation and removal.
  2. Precision Relief Valve: Coil spring with glass-fiber-reinforced nylon poppet.
  3. Media: Stronger, more durable media provides an outstanding 99% dirt-trapping efficiency. Synthetic fiber/cellulose blend increases dirt-trapping and dirt-holding capacity for higher levels of engine protection and longer filter life. Microscopic synthetic fibers create small windows that trap dirt particles without affecting oil flow.
  4. Anti-Drainback Valve: Silicone anti-drainback valve delivers superior start-up engine protection with up to 3X the hot oil resistance.
  5. Gasket: Internally lubricated sealing gasket for easier filter removal.

Installation Instructions
  • Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot.
  • Place a drain pan under the oil filter and unscrew oil filter.
  • Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
  • Apply film of clean oil to filter gasket. Do not use grease.
  • Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers.
  • Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
  • Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
  • Shut off engine and recheck oil level after 5 minutes and top off as necessary.
Anti-Drain Back ValveYes
Bypass Relief ValveYes
Bypass Relief Valve Setting (PS)14
Burst Pressure (PS)350
Filter Media MaterialCellulose/Synthetic Blend
Micron Rating (Mi)3
Non Slip GripYes
Torque NutNo
Height (in)3.469
Outside Diameter (in)2.688
Filter TypeSpin-On Canister
Thread SizeStandard
Gasket TypeGasket
Alternate/OEM Part Number(s): 1520853J00, 1651061A01, 1651061A20, 1651061A21, 1651061A30, 88969580, 9091503004, 9091510002, 9091510004, 9091510010, 90915TA002, 90915YZZA2, 90915YZZF1, 91173772, 91176161, 94851858

FRAM Warranty Information:
Filters - Vehicle Manufacturer's Recommended Service Intervals
Hard Parts - 12 Months
Warranty Details