More Information for CENTRIC 10410010
Continue Shopping
 
CENTRIC 10410010  
$28.79
Price
$0.00
Core
$28.79
Total
CENTRIC 10410010close
<
>
Part image
Brake Pads are sold as a set. Quantity of one (1) is for both wheels
CENTRIC 10410010 Specifications
Friction Material Bonding TypeIntegrally Molded
Friction Material CompositionSemi-Metallic
Inner Pad Height (IN)3.047
Inner Pad Height (MM)77.400
Inner Pad Width (IN)5.189
Inner Pad Width (MM)131.800
Mounting Hardware IncludedNo
Notes2 Pads with 1 Wear Sensor
Outer Pad Height (IN)3.047
Outer Pad Height (MM)77.400
Outer Pad Width (IN)5.189
Outer Pad Width (MM)131.800
Pad Quantity4
Pad Shims IncludedYes
Pad Wear Sensor IncludedYes
Prepared For Pad Wear SensorYes
Posi-Quiet; Semi-Metallic
Posi Quiet Semi-Metallic Brake Pads by Centric are manufactured using the same positive molding process as Original Equipment suppliers, ensuring precise fit, consistent stopping power and long life.

Features & Benefits:
  • Positive Molded for even wear characteristics
  • Copper-free friction formulas provide high initial bite
  • 100% scorched for easy bed-in
  • 100% shimmed to eliminate noise and vibration
  • Stable friction performance across a wide temperature range
  • Hardware included, where applicable
  • 100% Asbestos-free formulas

Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?

A common question many drivers have when shopping for brake pads is “What is the difference between the different brake pad materials?” While all brake pads will stop your vehicle, there are pros and cons of each pad material:

Brake Pad Material Cost Dust Level Noise Level Stopping Power Pad Life
Organic
$ Dust CloudDust CloudDust Cloud Speaker IconSpeaker Icon Stop Sign Hourglass Icon
Semi-Metallic
$$ Dust CloudDust Cloud Speaker IconSpeaker IconSpeaker Icon Stop SignStop SignStop Sign Hourglass IconHourglass Icon
Ceramic
$$$ Dust Cloud Speaker Icon Stop SignStop Sign Hourglass IconHourglass IconHourglass Icon


Installation Tips
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function



Attention California Customers - https://www.p65warnings.ca.gov/


Attention California Customers - WARNING: Cancer and Reproductive Harm

Alternate/OEM Part Number(s): 104-10010, 104.10010

CENTRIC Warranty Information:
90 days/3,000 miles