More Information for CENTRIC 10010010
Continue Shopping
 
CENTRIC 10010010close
Part image
Brake Pads are sold as a set. Quantity of one (1) is for both wheels
CENTRIC 10010010 Specifications
Friction Material Bonding TypeIntegrally Molded
Inner Pad Height (IN)3.047
Inner Pad Height (MM)77.400
Inner Pad Width (IN)5.189
Inner Pad Width (MM)131.800
Mounting Hardware IncludedNo
Notes2 Pads with 1 Wear Sensor
Outer Pad Height (IN)3.047
Outer Pad Height (MM)77.400
Outer Pad Width (IN)5.189
Outer Pad Width (MM)131.800
Pad Quantity4
Pad Wear Sensor IncludedYes
Prepared For Pad Wear SensorYes
OE Formula
Features & Benefits:
  • True OE formulation manufactured using OE processes and OE materials
  • Feature fine blank or precision blank backing plates with machined abutments for proper caliper fitment
  • Manufactured using OE positive mold technology for consistent friction material density throughout the pad resulting in even wear and performance characteristics
Installation Tips
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Attention California Customers - WARNING: Cancer and Reproductive Harm https://www.p65warnings.ca.gov


CENTRIC Warranty Information:
90 days/3,000 miles