• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Each unit has its main components tested or gauged against the O.E. standard. [Armature, Field, Bearing, Parking switch, or pulse board] - Then the final product is tested for each of its functions on the vehicle.
• Every motor bearing is re-impregnated or replaced as needed.
• Lubrication is applied to the output gear to provide maximum load capacity and long life.
• Motor magnets are 100% recharged for performance and reliability.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Weak solder points are 100% reflowed to extend life expectancy.

Wiper Motor Diagnosis

If your windshield wipers are not operating, this can be caused by a variety of different parts on the vehicle and mis-diagnosis is common. Read these troubleshooting tips first:

1. With the car off, try to manually move your wiper blades back and forth.
2. If you can move your wiper blades, that may signify a mechanical problem. Inspect your wiper linkage to see if it has separated the wipers from the motor. (To find a replacement Wiper Linkage, click on "Wiper Linkage/Transmission" under the "Wiper & Washer" category.)
3. If you cannot move your wiper blades, disconnect your wiper motor and turn your ignition and wipers on.
4. Test the connector's terminals with an Electrical Tester to see if the motor is receiving power.
5. If the wiper motor is receiving power but not functioning, it is likely a faulty wiper motor.
6. If your motor is not receiving power, you will want to check for blown fuses, bad relays, or broken wires to fix the connectivity issue.

Additional Resources