ACDELCO
More Information for ACDELCO 18FR2375
Continue Shopping
 
ACDELCO 18FR2375  
$49.79
Price
$60.00
Core
+ Sold in packs of 1x1
Pack
$109.79
Total
ACDELCO 18FR2375close
<
>
Part image
ACDELCO 18FR2375 Specifications
Bleeder Thread DiameterM7x1
Caliper Casting MaterialCast Iron
Caliper ColorNatural
Caliper Slides IncludedYes
Caliper TypeFloating
Casting MaterialCast Iron
FinishPlain
Height (IN)6.7
Inlet Fitting TypeFemale
Inlet Thread Diameter (IN)0.394
Inlet Thread Diameter (MM)10
Length (IN)9.5
Mounting Bolt Thread Pitch (MM)1.250
Mounting Bracket IncludedYes
Mounting Hardware IncludedYes
Mounting Hole Diameter (IN)12
Pad Wear Sensor IncludedYes
Pads IncludedNo
Piston 1 Diameter (IN)2.5
Piston 1 Diameter (MM)63.5
Piston 2 Diameter (IN)2.5
Piston 2 Diameter (MM)63.5
Weight (lb)11.98
Width (IN)6.7
Gold / Professional; Reman.; Pads Not Included
ACDelco Gold (Professional) remanufactured friction ready calipers use both aluminum and iron castings, making them the ideal high quality aftermarket replacement. Developed without attached brake pads, these calipers allow for customization for the application at hand.

Features & Benefits:
  • Pressure tested to ensure safe and confident braking
  • Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
  • Ethylene Propylene (EPDM) rubber components provide superior resistance to heat, corrosion, and leakage
  • Developed without attached brake pads for customization
Installation Tips
  • Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
  • Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
  • Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
  • Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
  • After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
  • After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
OEM / Interchange Numbers: 19203725

Warranty Information:
24 Month / Unlimited Mile Warranty
Warranty Details