FVP
More Information for FVP 14140063
{Alternate Inventory Numbers: 141-40063}
Continue Shopping
 
FVP 14140063  
$42.79
Price
$40.00
Core
+ Sold in packs of 1x1
Pack
$82.79
Total
FVP 14140063close
<
>
Part image
FVP 14140063 Specifications
Abutment Clips IncludedYes
Air Gap100.5mm
Bleeder Install Thread Count in4.5
Bleeder Screw IncludedYes
Bleeder Screw Thread Diameter10.000 MM
Bleeder Screw Thread SizeM10-1.00
Bracket #743.40063
Caliper Casting MaterialCast Iron
Caliper ColorGray
Caliper ManufacturerAkebono
Caliper TypeFloating
Casting Number5728
Inlet Fitting TypeBanjo
Inlet Thread Diameter10.000 MM
Inlet Thread SizeM10-1.00
Mounting Bracket IncludedYes
Mounting Hardware IncludedNo
Pad Wear Sensor IncludedNo
Pads IncludedNo
Piston Diameter2.244 in
Piston Diameter57.000 MM
Piston MaterialSteel
Piston Quantity1
Published Bore Size57
Rust Preventative CoatingYes
Reman
FVP Friction Ready calipers are remanufactured to meet ensure predictable and reliable performance while providing long service life.

Features:
  • 100% pressure tested and inspected to guarantee proper operation and fitment
  • All guide bolts, pins and seals are replaced, guaranteeing the caliper will function correctly
  • Hardware and brackets included (where applicable) to facilitate an easy installation
  • Brake pads not included
Installation Tips
  • Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
  • Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
  • Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
  • Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
  • After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
  • After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid

Warranty Information:
Limited Lifetime