FVP
More Information for FVP GREEN5050GAL
{Alternate Inventory Numbers: GREEN-GAL, GREEN50/50-GAL}
Continue Shopping
 
FVP GREEN5050GAL
Choose Type Below
Price
Core
Total
Choose Type:
  •  
  • Prediluted ($6.07) Warehouse
  • Concentrated ($8.64) Warehouse
FVP GREEN5050GALclose
<
>
Part image
Low Silicate Blend; 1 Gallon; Green; IAT

FVP Original Green Antifreeze/Coolant protects all common cooling system metals including solder, copper, brass, steel, cast iron and aluminum. It is a low silicate formula that provides excellent heat rejecting aluminum protection for all passenger car and light-duty truck cooling systems.

Features & Benefits:
  • Meets ASTM D3306 and D4985
  • May be added to any conventional antifreeze/coolant
  • Helps prevent freeze-ups and boil-overs
  • Protects aluminum and any other engine metals
  • A 50:50 mixture of FVP Original Green Antifreeze/Coolant and water provides freeze protection to -34F and raises the boiling point to +227F
  • Available in a concentrate or prediluted formula
Prediluted formula contains 50% distilled or deionized water, mixed with 50% full-strength concentrate, making it ready-to-use straight from the bottle.

Concentrated formula contains 100% full-strength concentrate, and must be mixed with the recommended ratio and type of water (typically distilled or deionized) before use.
Coolant / Antifreeze Says a lot about Cooling System Health!

Routinely inspect your Coolant / Antifreeze with these simple checks, and flush the system when necessary, to help prolong the life of your Cooling System:

COOLANT COLOR / CLARITY

Coolant should be bright, clear and free of debris. Dirty or brown coolant can be caused by:

  • A blown Cylinder Head Gasket
  • Corrosion from imbalanced coolant chemistry
Oil Coolant
Oil in Coolant
COOLANT CONDITION

Use Coolant / Antifreeze Test Strips to test condition / chemistry. Poor coolant condition can be caused by:

  • Frequently topping off with water
  • Improper dilution / mixing coolant formulas
Coolant Test Strip
Test Strip Process
COOLANT VOLTAGE

Use an Electrical Tester to Test Coolant for Electrolysis. Common causes of Electrolysis include:
  • Stray electrical current from a loose or damaged Battery Cable ground
  • Worn / old, acidic coolant
Electrical Tester
A reading of 0.4 volts or above
suggests electrolysis
Antifreeze is recyclable! Many towns have free waste drop-off sites, which a quick internet search will help you find.

Warranty Information:
Limited Lifetime