FVP
Más Información para FVP MV5050GAL
{Suplente inventario Números: MV-GAL, MV50/50-GAL}
Continuar Haciendo Compras
 
FVP MV5050GAL  
Elegir Tipo Debajo
Precio
Depósito
Empacar
Total
Elegir Tipo:
  •  
  • Prediluido ($6.34) Warehouse
  • Concentrado ($8.92) Warehouse
FVP MV5050GALclose
<
>
Part image
Vida Extendida; Todas Marcas / Todos los Modelos; 1 Galón

This formula provides a blend of premium long-lasting inhibitors to guard against temperature extremes and the ravages of rust, corrosion and premature water pump failure.

Features & Benefits:
  • May be added to any antifreeze/coolant of any make or model of automobile and light truck on the road, foreign or domestic
  • May be added to any color antifreeze/coolant (color may change, but the performance will not be affected)
  • Protects aluminum and any other engine metal
  • Protects for 5 years or 150,000 miles when added to any extended life coolant or when flushed and filled according to directions.
  • A 50:50 mixture of FVP Multi-Vehicle Antifreeze/Coolant and water provides freeze protection to -34°F and raises the boiling point to +227°F
  • Meets ASTM 3306, D4985
  • Available in a concentrate or prediluted formula
Prediluido la fórmula contiene un 50% de agua destilada o desionizada, mezclada con un 50% de concentrado de fuerza completa, por lo que está lista para ser utilizada directamente desde la botella.

Concentrado la formula contiene un 100% de concentrado, y debe mezclarse con la proporción y el tipo de agua recomendados (normalmente destilada o desionizada) antes de su uso.
El refrigerante / anticongelante dice mucho sobre la salud del sistema de refrigeración

Routinely inspect your Coolant / Antifreeze with these simple checks, and flush the system when necessary, to help prolong the life of your Cooling System:

COOLANT COLOR / CLARITY

Coolant should be bright, clear and free of debris. Dirty or brown coolant can be caused by:

  • A blown Cylinder Head Gasket
  • Corrosion from imbalanced coolant chemistry
Oil Coolant
Oil in Coolant
COOLANT CONDITION

Use Tiras de Prueba de Refrigerante / Anticongelante to test condition / chemistry. Poor coolant condition can be caused by:

  • Frequently topping off with water
  • Improper dilution / mixing coolant formulas
Coolant Test Strip
Test Strip Process
COOLANT VOLTAGE

Use an Probador Eléctrico to Test Coolant for Electrolysis. Common causes of Electrolysis include:
  • Stray electrical current from a loose or damaged Battery Cable ground
  • Worn / old, acidic coolant
Electrical Tester
A reading of 0.4 volts or above
suggests electrolysis
¡El anticongelante es reciclable! Muchas ciudades cuentan con lugares de depósito gratuito de residuos, que una rápida búsqueda en Internet le ayudará a encontrar.

Información de Garantía:
Limitado por vida