|
DEA / MARMON RIDE CONTROL 4713132
|
|
$8.31
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$8.31
Total
|
|
|
|
|
|
| DEA / MARMON RIDE CONTROL 4713132 Specifications |
|---|
| Bearing Included | Yes | | Bellows Included | No | | Bolt Included | No | | Bolt Thread Size | M10x1.25 | | Bumper Included | No | | Bushing Included | No | | Coil Spring Seat Included | No | | Greaseable | No | | Inner Race Material | Steel | | Inside Diameter (IN) | 0.59 | | Insulator Included | No | | Material | Steel Rubber | | Mounting Hardware Included | Yes | | Mounting Stud Length | 0.7 | | Nuts Included | Yes | | Outer Race Material | Steel | | Outside Diameter (IN) | 5.77 | | Pre Greased | Yes | | Sleeve Included | No | | Snap Rings Included | No | | Spacer Included | No | | Stud Quantity | 3 | | Washer Included | No |
|
|
Marmon Ride Control (formerly DEA Products) has been a trusted manufacturer of engine and transmission mounts for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you'll be installing a mount that will meet or exceed your original mount's specifications.
Testing Includes:- Visual Inspection
- Visual / Finish
- Paint / Rubber Appearance
- Weld Integrity
- Dimensional Verification
- Dimensions tested / approved using CMM (machine which takes readings in six degrees of freedom and displays these readings in mathematical form)
- Elastomer / Durometer Tested
- Rubber Hardness Check
- Every shipment inspected thoroughly
- Supplier verification on site
- Rubber Tensile Strength tested
- Strip sample and test of rubber processing
- Supplier must submit test report and sample from every batch
- On-site audits to verify process capabilities
- Thermogravimetric Analysis
- TGA / Rubber Compression Tests (changes in physical and chemical properties of mount materials are measured as a function of increasing temperature (with constant heating rate), or as a function of time (with constant temperature and/or constant mass loss))
- Rheometer / Vulkameter tested (measure the way rubbers respond to applied forces)
- Supplier must submit test report and sample from every batch
- On-site audits to verify process capabilities
|
| OEM / Interchange Numbers: 88946348, 8943720302, 8943720312, 8970428480, 94372030, 94372031, 97042840, 97042848 |
DEA / MARMON RIDE CONTROL Warranty Information:Limited Lifetime |
|
