POWER STOP
More Information for POWER STOP AR8293SCR
Continue Shopping
 
POWER STOP AR8293SCR  
$38.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$38.79
Total
POWER STOP AR8293SCRclose
Part image
POWER STOP AR8293SCR Specifications
Discard Thickness (IN)0.91
Discard Thickness (MM)23.00
Nominal Thickness (IN)1.03
Nominal Thickness (MM)26.00
Outside Diameter (IN)11.60
Outside Diameter (MM)295.80
Overall Height (IN)1.70
Overall Height (MM)43.80
Rust Resistant CoatingYes
Solid Or Vented Type RotorVented
Semi-Coated
Power Stop's Semi-Coated rotors are OE style replacements that feature a corrosion resistance coating on the hat, outer edges and vanes. These rotors are perfect for the everyday driver looking for an increase in protection against rust related braking problems.

Features:
  • Silver epoxy coating is precision applied to areas that are prone to corrosion, including the hat, outer edge and vanes
  • Manufactured to strict tolerances for smooth, quiet performance
  • Weight and vane count match original equipment design
  • Cross-hatched finish on friction surface for optimal pad break-in
  • 100% mill balanced
  • Resistant to warping or cracking
  • Perfect for non-aggressive driving
Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function


Videos

Tech Tip: How To Install A New Set of Brake Pads & Rotors

Tech Tip: How To Prepare the Wheel Hub When Installing a Rotor


Attention California Customers - WARNING: This product can expose you to chemicals including Arsenic, Chromium (Hexavalent compounds), Nickel and Cobalt, which are known to the State of California to cause cancer, and Arsenic and Chromium (Hexavalent compounds) which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.


Warranty Information:
90 Days / 3,000 Miles
Warranty Details