GATES
More Information for GATES 34044
Continue Shopping
 
GATES 34044  
$20.79
Price
$0.00
Core
$20.79
Total
GATES 34044close
<
>
Part image
GATES 34044 Specifications
Check ValveNo
ElectricNo
Jiggle Pin Weep HoleYes
Number of Bolt Holes3
Number of Seals1
OE ExactNo
Outlet Inside Diameter 1 (IN).547
Outlet Inside Diameter 2 (IN)1.096
Outlet Outside Diameter 1 (IN).745
Outlet Outside Diameter 2 (IN)1.308
Start to Open Temperature180 Degrees F
Start to Open Temperature82
TypeIntegrated Housing Thermostat
180 Degree Integrated Thermostat Housing; Includes Seal

There are two types of integrated thermostat housings: MAP controlled and standard. Both improve temperature regulation and control to help engines operate more efficiently. As vehicles are increasingly equipped with integrated thermostat housings, Gates research, development, and engineering is leading the industry in aftermarket thermostat solutions to provide the best quality alternative to OE dealerships.

  • Provides adaptive, on-demand engine cooling.
  • Allows ECU to regulate engine temperatures.
  • Improves temperature regulation & control.
  • Lowers emissions & fuel consumption.
  • Standard - All-in-one, bolt-on solution that includes thermostat, insert, seal and housing.
  • Same easy installation as Standard Integrated Thermostat Housings.
  • Meets or exceeds OE standards for fit, construction, and performance.
  • Category-leading vehicle coverage.
Which Thermostat Is Right For You?

Type Lifespan Flow Rate Precise Temperature Control Fail-Safe Engine Protection
Economy
Standard Replacement
★★ ★★
Performance
★★ ★★ ★★
Heavy Duty ★★★ ★★ ★★★
Premium
★★ ★★
What Temperature Thermostat Do I Need?

Thermostats have a “rated” temperature (such as 180F or 195F). This is the temperature the thermostat will start to open, releasing heated coolant from the engine into the radiator. The thermostat will fully open once the coolant gets another ten or fifteen degrees warmer.

OE TEMPERATURE

These thermostats match the OEM-specified temperature rating for the vehicle. Manufacturers recommend an OE temperature thermostat for most engines, especially for:

  • Modern engines with computers that use the coolant temperature to help control the fuel, emissions and other important systems

ALTERNATE TEMPERATURE

These thermostats have a temperature rating below (cooler than) the OEM-specified temperature rating for the vehicle. This option may make sense for use in:

  • Modified Engines
  • Performance Applications
  • Older / Classic Vehicles
Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

  • Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
  • Consider replacing the Radiator Hoses (and Hose Clamps) and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
  • Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
Additional Resources

Understanding Coolant Technology and Selection

Attention California Customers - Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

OEM / Interchange Numbers: 3M4G8575BD, 3M4Z8575AB, 3M4Z8575B, L32715170, L32715171, L32815170B, L33615170, L35715170B, LFE215170, ZZCA15172, ZZCA15172A

GATES Warranty Information:
Limited Lifetime
Warranty Details