DURA-BOND
More Information for DURA-BOND CHP25T
Continue Shopping
 
DURA-BOND CHP25T  
$85.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$85.79
Total
DURA-BOND CHP25Tclose
<
>
Part image
High Performance; Coated

Dura-Bond high performance all-round cam bearings offer more than double the fatigue strength of conventional bearings, with stand racing spring loads, and maintain the excellent surface characteristics of Babbitt.

Features:
  • Micro-Babbitt: A very thin layer of lining which reduces the microscopic deflections that occur to a bearing when loaded and thus increases fatigue life
  • Grain-Controlled Babbit: By cooling the Babbitt quickly in the casting process, very fine grain structure is achieved. By leaving the structure as cast, tensile strength is almost doubled over the standard bearing. This hard and high strength condition provides the “toughness” needed for racing applications
  • Burnishing: Cold working the surface of the Babbitt eliminates micro-fissures that can lead to fatigue failure. The surface also exhibits a higher hardness
  • Precision Machining: High Performance manufacturing tolerances are closer to control installed oil clearances, which reduce operating bearing pressure
  • Fluoropolymer Composite Coated: This dry lubricant actually penetrates the surface and retains engine oil on the surface, even under extreme heat and pressure conditions. Being a lubricant itself, the coating provides secondary (back-up) lubrication in the event that momentary oil starvation occurs. This characteristic is especially important during start-up because oil does not reach all critical components immediately

DURA-BOND Warranty Information:
12 Months