|
RAYBESTOS 680110P
|
|
$99.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$99.79
Total
|
|
|
|
|
|
| RAYBESTOS 680110P Specifications |
|---|
| Discard Thickness (IN) | 1.037 | | Discard Thickness (MM) | 26.350 | | Mounting Bolt Hole Quantity | 5 | | Nominal Thickness (IN) | 1.105 | | Nominal Thickness (MM) | 28.050 | | Outside Diameter (IN) | 12.015 | | Outside Diameter (MM) | 305.200 | | Overall Height (IN) | 1.770 | | Overall Height (MM) | 44.950 | | Rotor Type | Conventional | | Solid Or Vented Type Rotor | Vented | | Wheel Bolt Circle Diameter (IN) | 4.500 | | Wheel Bolt Circle Diameter (MM) | 114.300 | | Wheel Bolt Holes | 5 |
|
|
Law enforcement agencies demand performance, stealth and dependability in the patrol vehicles they operate on city streets. Raybestos® Police Rotors are engineered for superior performance and deliver unmatched stopping power, cooling properties and noise control.
Features & Benefits:
- Made from an enhanced iron material for maximized noise suppression
- Unique and specific vane design improves pad force distribution and enhances cooling airflow, allowing for optimal heat dissipation
- Coated with a full Grey Fusion 4.0™ coating to protect against the elements
- Meet the SAE standard for tensile strength, guaranteeing structural integrity and maximum service life
- A turned finish minimizes noise and improves responsiveness for smoother stops
 Installation Tips - Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
 Additional Resources
Additional Info on the Raybestos Police Line
|
| OEM / Interchange Numbers: 3W1Z1125AA |
Warranty Information:Limited Lifetime. Warranty covers defects in materials and workmanship. Normal/uneven wear is not covered |
|
