BSE
More Information for BSE 621308A
Continue Shopping
 
BSE 621308A  
Out of Stock
Price
Core
Pack
Total
Sensor Only

BSE NEW Mass Airflow Sensor lineup uses CERAMIC PCBs to provide the best product with added enhancements.

Features & Benefits:
  • Resistors are digitally calibrated for optimal precision
  • Superior thermal stability under even the most extreme under-the-hood temperature changes
  • Higher consistency in voltage readings at all rpms
  • More efficient heat dissipation to extend the service life of the component
  • Double binding for improved sensor reliability
Check for Vacuum Leaks First!

Vacuum leaks present symptoms similar to a faulty MAF Sensor. When replacing the MAF, always check for vacuum leaks, too. Common sources include:

  • Cracked or loose Vacuum Hoses / Connectors - an audio Stethoscope can help detect air induced sounds from vacuum leaks.
  • Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
    • Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
  • Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
  • Cracked Intake Boot (found in the "Engine" category)
Videos

Cleaning Your MAF Sensor

Additional Resources

RockAuto Newsletter: Maintaining the Optimal Air/Fuel Mixture
OEM / Interchange Numbers: 8V2Z12B579A

BSE Warranty Information:
1 Year (Unlimited Miles)