GATES
More Information for GATES 18010
{Alternate Inventory Numbers: 10010}
Continue Shopping
 
GATES 18010  
$6.92
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$6.92
Total
GATES 18010close
<
>
Part image
GATES 18010 Specifications
Branch Quantity0
Centerline Length (IN)9.6
Centerline Length (MM)244
End 1 Inside Diameter (IN).25
End 1 Inside Diameter (MM)6
End 2 Inside Diameter (IN).25
End 2 Inside Diameter (MM)6
MaterialEPDM
MoldedYes
Quick Connect Fitting Quantity0
Molded Heater Hose; 1/4" x 9 19/32"
Modular hoses are on many of today's vehicles and are much more complex than the standard molded hoses of the past. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle's cooling system running properly and efficiently for years to come.

Features & Benefits:
  • Engineered to resist electrochemical degradation (ECD®) – the leading cause of hose failure.
  • Eliminates water loss due to permeation.
  • Recommended for upper, lower, by-pass, heater and other coolant hose applications.
  • Heat and ozone resistant cover.
  • Installs easily without buckling, bending out of shape, or straining at connections.
  • Temperature rating: -40°F to 275°F (-40°C to 135°C) in coolant hose applications
  • Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Gates recommends replacing standard worm drive and spring loaded clamps with PowerGrip® SB clamps each time a new coolant hose is installed. Do not use for fuel or oil transfer applications.

Signs it is Time to Replace Your Coolant Hose(s)

Prevent system contamination and coolant leaks that could cause your engine to overheat by checking for these common signs of Coolant Hose damage / failure:

INTERNAL DAMAGE

Soft / mushy hose ends, usually about 2 inches from the clamp.

Internally Damaged Hose
Internally Damaged Hose
LEAKAGE

Moisture, drips or coolant bleed marks on or around the hose clamps, connectors or hose.

Leak Damaged Hose
Leaking Hose
HEAT DAMAGE

Slight swelling, or a hardened, glossy cover that is covered with cracks.

Heat Damaged Hose
Heat Damaged Hose
OZONE DAMAGE

Tiny, parallel cracks in the cover, usually at hose bends.

Ozone Damaged Hose
Ozone Damaged Hose
ABRASION DAMAGE

Rubbing marks on, or damage to the hose cover.

Abrasion Damaged Hose
Abrasion Damaged Hose
OIL CONTAMINATION

Soft or spongy to the touch - bulges and swelling are readily apparent.

Oil Damaged Hose
Oil Contaminated Hose
Videos

Protect The Ride – O-Rings & Rubber

Additional Resources

Evolving Hose Technology
OEM / Interchange Numbers: 0K24715281D, 1319171C50, 1319172C50, 1405453F11, 15802763, 1626111060, 1626764010, 1734376010, 19130290, 19130424, 19524P5A000, 19528P3FA50, 22633443, 22717008, 22733960, 2546826002, 8724589247, 94851803, 96058065, 96069214, B61P15261A, BP6D15261, E9JY8597B, E9JZ8597A, F4XY18472G, JE2213691, JE2713692, KLG413681, MD302963, ZM0113681, ZM0113691A

GATES Warranty Information:
Limited Lifetime
Warranty Details