STOPTECH
STOPTECH
More Information for STOPTECH 12744040L
Continue Shopping
 
STOPTECH 12744040Lclose
Part image
Image is of a typical part(s); part appearance varies by application. Rotors & Drums are sold individually
StopTech Sport Drilled/Slotted Disc
Centric OE Type Drilled & Slotted Rotors offer improved cooling as well as increased pad bite. By providing an escape path for water, drilled & slotted rotors also improve initial brake response under wet conditions.

Features & Benefits:
  • Slots improve brake performance by wiping away used friction material that otherwise accumulates between the rotor and pad
  • Precision drill holes help heat from the braking system dissipate more efficiently
  • Power Alloy improves crack resistance and reduces noise, vibration and harshness (NVH)
  • 100% fully machined finishes, including rotor hats, provide better rotor balance and creates a cleaner, more finished looking component
  • Symmetric Vane Casting provides proper heat transfer and thermal efficiency, resulting in superior braking power and safety
  • Directional Vane Design provides increased resistance to brake fade and faster thermal recovery to temperature spikes generated by aggressive or repeat stops
  • Mill Balancing reduces feedback associated with rotor vibration and provides a smooth confident application of braking force

Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function



STOPTECH Warranty Information:
90 days/3,000 miles