|
GRAF PA1024
|
|
$67.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$67.79
Total
|
|
|
|
|
|
| GRAF PA1024 Specifications |
|---|
| Gasket or Seal Included | Yes | | Housing Material | Aluminium | | Impeller Material | Metal | | Impeller Outside Diameter | 68.7 mm | | Impeller Vane Quantity | 6 | | Package Contents | Water Pump, Gasket |
|
|
| GRAF is a brand of the Metelli Group, a 62 year old manufacturer in Italy with 7 production plants. With its production of 6 million units per year, Metelli is the largest water pump manufacturer in Europe, selling in over 90 countries. Metelli is an OE manufacturer to Stellantis group, Ferrari, Lamborghini, Iveco, and Ford. The Graf aftermarket range has been developed in accordance to the most strict OE technical specifications.
Every belt driven water pump has a weep hole that might leak a little in the beginning. Some seepage from the weep hole is normal during the break-in period (about 10 minutes), and does not indicate a defect.
 Cooling System Maintenance | Tips & Tools Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:
- Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
- Consider replacing the Radiator Hoses (and Hose Clamps), Thermostat and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
- Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
|
| OEM / Interchange Numbers: 2510037102, 2510037200, 2510037201, 2510037202, PA10103 |
Warranty Information:2 Years |
|
