| FERODO DDF1107 Specifications |
|---|
| Bolt Circle Diameter (IN) | 0.571 | | Bolt Circle Diameter (MM) | 14.500 | | Construction | Full Cast | | Disc Finish | Turned | | Height (IN) | 1.685 | | Height (MM) | 42.800 | | Material | Cast Iron | | Nominal Thickness (IN) | 1.181 | | Nominal Thickness (MM) | 30.000 | | Outside Diameter (IN) | 11.827 | | Outside Diameter (MM) | 300.400 | | Rust Resistant Coating | Yes | | Slotted | No |
|
|
Specifically designed for British, Italian, Swedish and other European import vehicles, FerodoŽ brake rotors are carefully engineered and the perfect match for Ferodo brake pads. Ferodo has over 100 years of experience in friction and braking.
Features & Benefits:
- Features the same top performance and casting process customers have come to expect from Ferodo
- Outstanding heat dissipation and excellent metallurgy/design
- Vibration damping designed to minimize brake noise and uneven pad wear
- Optimized surface finish for quick, smooth bedding of pad to rotor
- Easy installation due to positioning screw kit included (where applicable)
- Perfect match for Ferodo brake pads
 Installation Tips - Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
|
FERODO Warranty Information:12 months/12,000 miles |
|
