Go to RockAuto Home Page
More Information for FOUR SEASONS 68313
Add to Cart
 
Continue Shopping
FOUR SEASONS 68313close
<
>
Part image
w/ Clutch
Quality Comes First

Four Seasons' engineering validation process simulates real world environment equivalent to 100,000 miles.

  • Every compressor is 100% vacuum and leak tested to ensure a long lasting, trouble free compressor
  • Every manufactured lot is subjected to random selection for validation testing, performed under extreme conditions
Design Enhancement

As a manufacturer, Four Seasons identifies flaws and deficiencies in OE design and engineers solutions for high pattern failures.



Proper Compressor Installation to Prevent Premature Failure


Should I also replace my condenser?
Vehicle manufacturers recommend that the condenser be replaced whenever the compressor is replaced. While older Tube & Fin style condensers can technically be flushed, metal shards from a failed compressor can get lodged in the cylindrical tubes and restrict refrigerant flow, diminishing the heat transfer capabilities of the condenser and A/C system. Newer style, mini-tube condensers cannot be flushed and should always be replaced along with the compressor.

Compressor Installation Instructions

Refrigerant TypeR-134A
Pulley Groove Quantity6
Clutch IncludedYes
Belt TypeSerpentine
Coil Clock PositionWire Lead
Compressor TypeVS18M
Clutch Pulley Diameter4.6875
Coil Voltage12
Mounting TypeTangent Mount
Distance Between Mounting Holes2.796875
Oil TypePAG 46
O-Ring B Number/Desc[24659] / Green O-Ring
Suction Port TypeO-Ring
Discharge Port TypeO-Ring
DescriptionCompressors - New
New or RemanNew
O-Ring B Quantity1
StyleWobble Plate
TypeHALLA
Printed Foot NoteMay Require use of OE Manifold
O-Ring A Quantity1
Mount Distance MM71.120
Switch / Sensor DescControl Valve
Ctch Dia. MM Prmy119.050
O-Ring A Number/Desc[24602] / Green Round O-Ring

Warranty Information:
Compressors 2 years/24,000 miles. Commercial, heavy duty, or fleet use - Compressors 12 month. IMPORTANT A/C COMPRESSOR WARRANTY NOTE: In order to ensure that proper warranty credit is issued if needed, the compressor installation instructions must be adhered to. All compressors returned for defect must show proof of purchase of an A/C Orifice Tube (or A/C Expansion Valve), A/C Receiver Drier/Accumulator, and A/C System Flush or a Work Order showing the purchase of these items and that the system was flushed.