|Molded Heater Hose; 5/8" x 20-5/16"|
|Factory molded to fit specific applications. Meets or exceeds OEM specifications.
Engineered to resist electrochemical degradation (ECD®) – the leading cause of hose failure.
Eliminates water loss due to permeation.
Recommended for upper, lower, by-pass, heater and other coolant hose applications.
Heat and ozone resistant cover.
Installs easily without buckling, bending out of shape, or straining at connections.
Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature rating: -40°F to 275°F (-40°C to 135°C) in coolant hose applications
NOTE: Gates recommends replacing standard worm drive and spring loaded clamps with PowerGrip® SB clamps each time a new coolant hose is installed.
CAUTION: Do not use for fuel or oil transfer applications.
|Centerline Length (in)||20.3|
|Centerline Length (mm)||516|
|Number of Branches||0|
|Inside Diameter 1 (in)||.63|
|Inside Diameter 1 (mm)||16|
|Inside Diameter 2 (in)||.63|
|Inside Diameter 2 (mm)||16|
|Number Of Quick Connect Fittings||0|
|Alternate/OEM Part Number(s): 11193, 15065415, 15115123, 15115124, 15263237, 19130009, 19130010, 25958073, 89019080, F65H18K580BA, F65Z18472BB, F65Z18472BBB, F65Z18472BBC, F65Z18473BB, SID9193|