|
EDELMANN 80473
|
|
$5.89
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$5.89
Total
|
|
|
|
|
|
| EDELMANN 80473 Specifications |
|---|
| Length (IN) | 22 | | End 1 Diameter (MM) | 16 | | End 1 Type | Male O-Ring | | End 2 Diameter (IN) | .375 | | End 2 Type | I.D. Hose |
|
|
Edelmann power steering return hose covers are highly resistant to oil, heat and ozone which cause ordinary assemblies to fail prematurely. Tube construction withstands internal oil temperatures of up to 300 degrees Fahrenheit. Tubing is Pro-coated or terne coated and couplings and fittings are zinc-chromate plated for rust and corrosion protection.
 Installation Tips - Replace all power steering hoses at the same time, to prevent system contamination
- Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
- Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat
- Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
Attention California Customers - WARNING: Using this product can expose you to 1,3Butadiene, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Wash hands after handling. (18)
|
| OEM / Interchange Numbers: 26038251 |
EDELMANN Warranty Information:Elite Power Steering Pumps, Rack & Pinions, Steering Gears: 100 Years / 1,000,000 Miles; Elite Hoses: Limited Lifetime; Non-Elite Hoses and Fittings: 12 Months |
|
