RAYBESTOS
More Information for RAYBESTOS 66327
{Alternate Inventory Numbers: 66327:8, F66327}
Continue Shopping
 
RAYBESTOS 66327  
$26.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$26.79
Total
[Wholesaler Closeout - Private Label Pkg. - 30 Day Warranty] (Only 1 Remaining)
RAYBESTOS 66327close
<
>
Part image
Sold Individually
RAYBESTOS 66327 Specifications
Discard Thickness (IN)0.940
Discard Thickness (MM)23.900
Mounting Bolt Hole Quantity5
Nominal Thickness (IN)1.025
Nominal Thickness (MM)26.050
Outside Diameter (IN)10.900
Outside Diameter (MM)276.850
Overall Height (IN)2.055
Overall Height (MM)52.200
Rotor TypeConventional
Solid Or Vented Type RotorVented
Wheel Bolt Circle Diameter (IN)4.500
Wheel Bolt Circle Diameter (MM)114.300
Wheel Bolt Holes5
Specialty - Street Performance Disc
Raybestos® Street Performance Rotors deliver a stronger bite without sacrificing smooth braking. Each rotor is made with application-specific enhanced iron, which suppresses noise and keeps brakes running cool, quiet and vibration free.

Features & Benefits:
  • Carbon Enhanced Iron Material maximizes noise suppression and increases thermal conductivity to keep brakes running cool, quiet and vibration free
  • Cooling vanes match OE configurations, providing optimal cooling, reduced fade and increased pad life
  • Each rotor is coated to reduce rust for optimal airflow, cooling and aesthetics
  • Meet the SAE standard for tensile strength, guaranteeing structural integrity and maximum service life
  • A turned finish minimizes noise and improves responsiveness for smoother stops
  • Lateral runout of 0.002” or less and a minimal thickness variation of less than 0.0004”, ensuring less pedal pulsation, less brake noise, and extended pad life
Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function


OEM / Interchange Numbers: 402060B000, 402067B000, F3XY1125A, XF5Z1125AA

Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

Regular Inventory Warranty Information:
Limited Lifetime. Warranty covers defects in materials and workmanship. Normal/uneven wear is not covered