More Information for CARDONE 22305
{Alternate Inventory Numbers: 22-305}
Continue Shopping
CARDONE 22305  
+ Sold in packs of 1x1
CARDONE 22305close
Part image
CARDONE 22305 Specifications
Casting MaterialSteel; Aluminum
Distance Between Mounting Holes (IN)3.00
Distance Between Mounting Holes (MM)76.20
Hose Port TypeO-Ring
Input Shaft Diameter (IN)0.725
Input Shaft Diameter (MM)18.42
Input Shaft Length (IN)2.88
Input Shaft Length (MM)73.152
Number of Mounting Holes2
Package ContentsRack and Pinion, Rubber Bushing, Sealing Kit, Instruction Sheet
Pressure Port Thread SizeM18 x 1.5
Rack Length (IN)49.25
Rack Length (MM)1250.95
Return Port Thread SizeM16 x 1.5
Steering Rack ColorBlack
Thread Length (IN)2.25
Thread Length (MM)57.15
Tie Rod Ends IncludedYes
Total Turns Lock To Lock2.94
Remanufactured; Includes Inner Tie Rods
Cardone's Remanufacturing Process:
  • Rubber sealing components are replaced
  • Finished in protective coating to prevent corrosion and rust
  • Undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications
Installation Tips
  • Replace Power Steering Pressure and Return Hoses when replacing the rack & pinion. Steering hoses can degrade internally and cause contamination in the power steering system, which can damage the new rack & pinion
  • Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
  • Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
  • Bleed the system to prevent noise and extend the life of the steering components

Diagnosing Pump Failure vs. Rack Failure

Fill & Bleed Instructions

Flush Procedure

Installation Tips

Additional Resources

Prevent Damage To Rack & Pinion Threads
Loosening Boot Clamps Before Alignment Prevents Damage
Flush Procedure
OEM / Interchange Numbers: 4147323, 4188844, 4333523

Warranty Information:
36 Months / 36,000 Miles
Warranty Details