RAYBESTOS RC10156 Specifications |
---|
Bore Size | 2.126 | Inlet Thread | M10x1 | Bleeder Thread | M10x1 |
|
|
Professional Grade™ Premium Loaded Calipers follow OE specifications and use the best friction replacement available. Before going into the box, each caliper is 100% pressure tested to ensure safe, leak-free performance. Professional Grade™ loaded caliper assemblies include: - Application-specific OE-matched friction
- New bleeder screws and copper washers
- New hardware
- Pre-lubrication of critical areas with high temperature synthetic lubricant
- Mounting bolts and sleeves
- New phenolic pistons (where OE is phenolic)
- New EPDM rubber components
- Mounting brackets (where applicable)
 Installation Tips - Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
|
Warranty Information:Limited Lifetime. Warranty covers defects in materials and workmanship. |
|