Engranaje, Página de Instrucciones (2), Instrucciones de Purga, Etiqueta de Instrucciones, Juego de sellado
Brazo Pitman Incluido
No
Diámetro Interno de Puerto de Presión
0
Puerto de Presión Tamaño de Rosca
M18 x 1.5
Bomba Rotación
Estándar
Return Port ID Size
0
Puerto de Retorno Tamaño de Rosca
M16 x 1.5
Caja de Dirección Tipo
Dirección Asistida
Total Activa Bloqueo a Bloqueo
4.1
Remanufacturado
Cardone Remanufacturing Includes:
New O-rings and lip seals are installed
Critical components (campacs, spool valves, etc.) are triple-tested
Shafts are surfaced to precise specifications
Rust inhibitive “Cool Dip” finished for a consistent, protective finish that will not crack, flake or peel
Computer tested for proper flow, leakage and performance
Consejos De Instalación
Replace Power Steering Pressure and Return Hoses when replacing the steering gear. Steering hoses can degrade internally and cause contamination in the power steering system, which can damage the new rack & pinion
Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
Bleed the system to prevent noise and extend the life of the steering components
Consejos De Instalación
Videos
Adicional Recursos