APDI/PRO
More Information for APDI/PRO 9010333
Continue Shopping
 
APDI/PRO 9010333  
$128.79
Price
$0.00
Core
$128.79
Total
APDI/PRO 9010333close
Part image
APDI/PRO 9010333 Specifications
ConstructionV-Cell
Core Depth (IN)2-1/2
Core Height (IN)9-1/2
Core Width (IN)6-3/8
Inlet Connection (IN)5/8
Outlet Connection (IN)3/4
  • Pro heaters are designed with tubes that are coated internally with a corrosion resistant cladding alloy 7072. This cladding alloy covers the inside surface of the core tubes to ensure galvanic protection against pitting corrosion. Any spot attack on the coolant side of the tube will penetrate only as far as the core alloy where further progress is stopped dead in its tracks.
  • Heater core side pieces are brazed to the header to ensure a strong joint that will prevent breathing and fatigue during pressure cycling.
  • Heater core side pieces are ribbed to further increase strength and rigidity to protect the fins against excess stress and strain.
  • Pro heaters are made with high strength rigid brazed joints for durability and excellent resistance to corrosion and erosion.
  • All Pro heater cores are designed to meet or exceed OE specifications for form, fitment, and function. Each heater model is tested in the actual vehicle HVAC heater module to ensure easy installation and proper function.
  • All heater cores are leak checked several times throughout the manufacturing process to ensure a 100% leak free unit.
Service Tip: If you are experiencing unexplained or reoccurring heater core leaks, or notice dark spots on your failed heater core, test your coolant for Electrolysis. If detected, correct the source of the problem before replacing your failed heater core to prevent repeat failure.
Cooling System Maintenance | Tips & Tools

Premature Heater Core failure is often caused by poor Cooling System maintenance. Protect your engine and maximize system performance with simple preventative maintenance:

  • Completely drain and flush the system using Cooling System Flush. Flushing the system is critical to prevent system contamination and failure.
  • Consider replacing the Heater Hoses (and Hose Clamps), Thermostat and Radiator Cap as part of routine preventative maintenance. Rust and debris from degrading parts can clog the Heater Core and Radiator, and lead to costly engine damage.
  • Refill Radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.

Attention California Customers - WARNING: This product can expose you to chemicals including lead which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.

Alternate/OEM Part Number(s): 3009917

APDI/PRO Warranty Information:
12 Months
Warranty Details