• Stainless steel or brass bridge and spring frame is channel-constructed for strength and rigidity
• Tapered-end stainless steel pistons feature flexible elastomeric boots
• Streamlined venturi nozzle for maximum coolant flow
• Mounting flange is designed for an optimal fit in the engine housing
• Stroke-tested, heat-tested, pressure-tested and endurance-tested in real-world conditions equivalent to 10-year/150,000 miles
• Designed to exacting Ford Original Equipment specifications to maintain recommended coolant temperature for optimal engine temperature and heater performance

Which Thermostat Is Right For You?

What Temperature Thermostat Do I Need?

Thermostats have a “rated” temperature (such as 180F or 195F). This is the temperature the thermostat will start to open, releasing heated coolant from the engine into the radiator. The thermostat will fully open once the coolant gets another ten or fifteen degrees warmer.

Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

• Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
• Consider replacing the Radiator Hoses (and Hose Clamps) and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
• Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.