Gates Heavy Duty Water Pumps are developed in partner with top OEMs, bringing your heavy-duty vehicle's cooling system a high-quality, high-strength water pump constructed with premium alloy materials. The pumps are 100% functional and quality tested, with upgraded seals and bearings to handle diesel loads. Gates also conducted leakage test on the casting and fully assembled water pump to ensure your water pump stands up to the toughest demands.
Designed to handle rugged Fleet standards
Pumps are computer-tooled and fitted with a precisely balanced impeller to ensure OE fit and function
Covered by the best heavy-duty warranty in the industry
Every belt driven water pump has a weep hole that might leak a little in the beginning. Some seepage from the weep hole is normal during the break-in period (about 10 minutes), and does not indicate a defect.
Cooling System Maintenance | Tips & Tools
Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:
Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
Consider replacing the Radiator Hoses (and Hose Clamps), Thermostat and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
Cooling System Maintenance | Tips & Tools
Videos
Additional Resources