More Information for LUK 05060
{Alternate Inventory Numbers: 05-060}
Continue Shopping
LUK 05060  
+ Sold in packs of 1x1
LUK 05060close
Part image
LUK 05060 Specifications
Clutch Diameter (IN)11-5/16"
Clutch Disc Diameter (IN)9-1/8"
Clutch Disc Spline Quantity18
Clutch Plate Facing Outer Diameter (IN)8-7/8"
Input Shaft Diameter (IN)13/16"
Kit ContentsCover Assembly, Clutch Disc, Release Bearing, all Necessary Pilots, Accessory Pack
Pressure Plate TypePush Type Diaphragm
The LuK RepSetŪ is the industry's most recognized and trusted clutch kit. Designed and engineered to perfectly match the vehicle's unique performance characteristics, every kit is tested and guaranteed to meet critical performance specifications, including torque capacity, material hardness, hub spline tolerance, wear capacity, clamp load, pressure plate lift and torsional vibration dampening. When you install a LuK RepSet, you get a replacement clutch set with the same flawless performance as your original equipment parts.

Features & Benefits:
  • Contains all components needed for clutch replacement
  • Organic friction disc delivers smooth, comfortable engagements
  • Engineered and manufactured to OE specifications
  • Precision-machined from premium grade cast iron
  • Excellent heat-absorbing capacity
  • Superior quality friction surface
  • Perfectly balanced
  • Simple to install

Organic vs. Kevlar vs. Ceramic Friction Disc - What Is The Difference?

The Friction Disc is a vital part of any clutch. It connects the pressure plate and flywheel, and is responsible for transferring engine power to the rest of the vehicle. Clutch Kits come with several different types of friction discs, and it is important to understand the pros and cons of each material:

Clutch Disc Material Smooth Engagement Holding Power
(Friction "Grab")
High Torque Capacity Lifespan Gentle To Flywheel
★★★ ★★ ★★★
★★★ ★★ ★★ ★★★ ★★★
Ceramic / Cerametallic
★★★ ★★★

Tips & Tools For The Job
  • Wear a Dust Mask to protect against hazardous clutch dust. You can also spray the clutch with water prior to removal to reduce the amount of airborne dust during disassembly.
  • Use a Flywheel Turner to hold the flywheel in place while removing and reinstalling the pressure plate bolts.
  • Apply Blue Threadlocker to flywheel bolts prior to installation to prevent backing out due to the high vibrations flywheels are subject to.
  • Use the provided lubricant to lightly lubricate the splines of the input shaft. Over lubricating the input shaft risks lubricant transfer to the clutch friction disc and can cause clutch slippage.
  • Be sure to install the new clutch friction disc in the correct direction. The disc will have a "Flywheel Side" label on one side.


All About LuK RepSet Clutch Kits

OEM / Interchange Numbers: 623278977

LUK Warranty Information:
12 Months