ACDELCO
More Information for ACDELCO 46G0104A
Continue Shopping
 
ACDELCO 46G0104Aclose
Part image
ACDELCO 46G0104A Specifications
ColorBlack
Grease Fitting IncludedNo
Height (IN)1.98
Height (MM)50.29
Inside Diameter (IN)1.00
Inside Diameter (MM)25.4
MaterialThermoplastic
Mounting Hardware IncludedNo
Outside Diameter (IN)2.17
Outside Diameter (MM)55.1
Width (IN)1.35
Width (MM)34.29
Advantage
Features:
  • Fatigue resistance supports extended service life, even in harsh conditions
  • Polyurethane bushing design features excellent abrasion, wear resistance, extreme temperature tolerance, and resistance to oils and fluids
  • Manufactured at ISO 9001-certified facilities to ensure consistent high-quality
  • Provides the performance and dependability you expect from ACDelco
  • Economical value with dependable quality
  • For General Motors vehicles as well as most makes and models
Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
How To Determine Stabilizer (Sway) Bar Diameter

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

  1. Use a digital caliper or micrometer for a precise reading
  2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
  3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.

OEM / Interchange Numbers: 19297363

Warranty Information:
12 Months / 12,000 Miles
Warranty Details