| ACDELCO 36363990 Specifications |
|---|
| Fittings Included | Yes | | Material | Rubber Hose Steel Line | | Length | 39.0 in. | | Color | Black and Silver | | Hose Inside Diameter | 9.4 | | End 1 Thread Diameter | 0.62 | | End 1 Thread Diameter | 16.0 | | Hose Inside Diameter | 0.37 |
|
|
High-quality ACDelco Power Steering Hoses are specially designed to perform in high-temperature areas and resist leaks.
- Silver heat guard helps protect the hose in high-temperature areas
- Fluid restrictors help absorb vibration and help reduce noise
- Double-lock beading with barbed tube end provides crimping and assists in leak prevention
Hydroboost uses the pressure of the Power Steering Pump to power the Brake Booster. This is denoted by a third port on the Power Steering Pump and hoses that connect the pump to a brake unit behind the master cylinder.
 Installation Tips - Replace all power steering hoses at the same time, to prevent system contamination
- Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
- Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat
- Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
Attention California Customers - Warning: Using this product can expose you to 1,3-Butadiene, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov
|
| OEM / Interchange Numbers: 19286505 |
|
