STANT
More Information for STANT 14218
{Alternate Inventory Numbers: 35218}
Continue Shopping
 
STANT 14218  
$5.58
Price
$0.00
Core
$5.58
Total
[Wholesaler Closeout -- 30 Day Warranty]
STANT 14218close
Part image
STANT 14218 Specifications
Temperature (F)180 Degrees
By-Pass Flange Diameter (IN)1.2
Depth from Flange (IN)1.45
DesignBottom By-Pass
Flange Diameter (IN)2.31
Height from Flange (IN)0.77
Includes Installation ToolNo
Jiggle PinNo
Number of Check ValvesNone
Number of GasketsNone
Number of Seals1
OE Comparison RatingOE Quality
TypeOE Type Thermostat
180 Degree; Includes Seal
OE supplier experience results in a match in fit and function when a replacement part is needed.
  • Technologically advanced designs use bleed notches, check valves, and other methods to assist in releasing air from the cooling system.
  • Stainless steel bridge with channel-design for strength and rigidity.
  • Stainless steel piston for longer life and more efficient operation.
  • Brass cover and guide for heat motor piston for more efficient operation.
  • Stainless steel mounting flange designed to properly fit and seat the thermostat in outlet casting, resulting in better performance.
  • Channel constructed stainless steel spring frame for extra strength and durability.
  • Stainless steel spring provides precise operating compression to quickly reach optimal engine operating temperature, resulting in better gas mileage.

Which Thermostat Is Right For You?

Type Lifespan Flow Rate Precise Temperature Control Fail-Safe Engine Protection
Economy
Standard Replacement
★★ ★★
Performance
★★ ★★ ★★
Heavy Duty ★★★ ★★ ★★★
Premium
★★ ★★
What Temperature Thermostat Do I Need?

Thermostats have a “rated” temperature (such as 180F or 195F). This is the temperature the thermostat will start to open, releasing heated coolant from the engine into the radiator. The thermostat will fully open once the coolant gets another ten or fifteen degrees warmer.

OE TEMPERATURE

These thermostats match the OEM-specified temperature rating for the vehicle. Manufacturers recommend an OE temperature thermostat for most engines, especially for:

  • Modern engines with computers that use the coolant temperature to help control the fuel, emissions and other important systems

ALTERNATE TEMPERATURE

These thermostats have a temperature rating below (cooler than) the OEM-specified temperature rating for the vehicle. This option may make sense for use in:

  • Modified Engines
  • Performance Applications
  • Older / Classic Vehicles
Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

  • Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
  • Consider replacing the Radiator Hoses (and Hose Clamps) and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
  • Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
Additional Resources

Installation Instructions
OEM / Interchange Numbers: 10128336, 10223370, 12555290

Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

Regular Inventory Warranty Information:
90 Days
Warranty Details