CENTRIC
More Information for CENTRIC 22768000L
{Alternate Inventory Numbers: 227.68000L}
Continue Shopping
 
CENTRIC 22768000L  
Add to Cart to See Price
Price
Core
Pack
Total
CENTRIC 22768000Lclose
<
>
Part image
Sold Individually
CENTRIC 22768000L Specifications
ABS Sensor Ring IncludedNo
Bearings IncludedNo
Center Hole Diameter (IN)4.004
Center Hole Diameter (MM)101.700
Disc MountingBehind the Hub
Discard Thickness (IN)1.215
Discard Thickness (MM)30.860
Mounting Bolt Hole Circle Diameter (IN)5.500
Mounting Bolt Hole Circle Diameter (MM)139.700
Mounting Bolt Hole Diameter (IN)0.594
Mounting Bolt Hole Diameter (MM)15.100
Mounting Bolt Hole Quantity6
Nominal Thickness (IN)1.290
Nominal Thickness (MM)32.760
Outside Diameter (IN)11.866
Outside Diameter (MM)301.400
Overall Height (IN)2.311
Overall Height (MM)58.700
Solid Or Vented Type RotorVented
Surface TypeSlotted X Drilled
Vane StyleStraight
C-TEK; Sport Drilled/Slotted
Centric C-TEK Drilled & Slotted Rotors provide added bite and improved looks. Zinc coating provides improved protection from corrosion extending service life.

Features & Benefits:
  • Drilled & Slotted for increased bite and better performance
  • Non-Directional Finishes
  • Machined non-friction surfaces
  • G11 metallurgy
  • Zinc coated for corrosion protection

Installation Tips
  • Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
  • Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
  • After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
  • Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
  • Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
  • Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
  • After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function



Attention California Customers - https://www.p65warnings.ca.gov/


Attention California Customers - WARNING: Cancer and Reproductive Harm


CENTRIC Warranty Information:
90 days/3,000 miles