More Information for EDELMANN 70343
{Alternate Inventory Numbers: 2891078, 2891478}
Continue Shopping
EDELMANN 70343  
EDELMANN 70343close
Part image
EDELMANN 70343 Specifications
OE Comparison RatingOE Performance
Length (IN)36
End 1 Diameter (IN).3125
End 1 TypeFemale SAE
End 2 Diameter (IN).375
End 2 TypeMale Inverted Flare
Includes Switch PortNo
  • Tubing is coated and couplings and fittings are zinc-chromate plated for rust and corrosion resistance. They are highly resistant to oil, heat and ozone, to prevent premature failure
  • Double plies of high-tensile strength braided fabric help to withstand pulsation pressures up to 1,500 psi and bursting pressures up to 8,900 psi
Installation Tips
  • Replace all power steering hoses at the same time, to prevent system contamination
  • Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
  • Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat
  • Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components

Attention California Customers - WARNING: This product can expose you to Lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Wash hands after handling. (26)

EDELMANN Warranty Information:
Elite Power Steering Pumps, Rack & Pinions, Steering Gears: 100 Years / 1,000,000 Miles; Elite Hoses: Limited Lifetime; Non-Elite Hoses and Fittings: 12 Months