| DAYCO PB1532N Specifications |
|---|
| Bolt Hole Quantity | 2 | | Counterweight Balance | Neutral, no counterweight | | Crank Bore (IN) | 1.261 | | Crank Bore (MM) | 32.01 | | Crank Trigger/Exciter Plate | No | | Hardware Included | No | | Installation Instructions Included | No | | Nose Outside Diameter (IN) | 2.069 | | Nose Outside Diameter (MM) | 52.53 | | Number of Integrated Pulleys | 3 | | Outer Ring Material | Cast Iron | | Overall Outside Diameter (IN) | 6.497 | | Overall Outside Diameter (MM) | 165.00 | | Overall Width (IN) | 2.599 | | Overall Width (MM) | 66.00 | | Pulley 1 Number of Grooves | 4 | | Pulley 1 Outside Diameter (IN) | 5.434 | | Pulley 1 Outside Diameter (MM) | 138.000 | | Pulley 1 Type | Serpentine | | Pulley 2 Number of Grooves | 4 | | Pulley 2 Outside Diameter (IN) | 6.221 | | Pulley 2 Outside Diameter (MM) | 158.000 | | Pulley 2 Type | Serpentine | | Ring Width (in) | 1.791 | | Ring Width (MM) | 45.49 | | Timing Marks | Yes | | Woodruff Key Included | No |
|
|
PowerBond Premium OEM Replacement Balancers are manufactured using premium ductile iron castings and injection bonded dampening rubber.
Features & Benefits:- Unlike typical original equipment balancers that are made with press inserted dampening rubber, the bonded dampening rubber in the PowerBond Premium OEM Replacement Balancer provides superior bonding strength between the inner and outer balancer rings that minimizes spinning and dislocation in high torque and serpentine belt applications.
- With a unique combination of high strength castings, bonded dampening rubber, and dynamic balance, the PowerBond Premium OEM Replacement Balancer is the ultimate standard replacement balancer.
|
Warranty Information:12 Months/12,000 Miles |
|
