Standard (Only 4 Remaining) ($19.29/Each)x4 $77.16
0.50MM Oversize($21.79/Each)x4 $87.16
0.75MM Oversize($21.79/Each)x4 $87.16
ENGINETECH P3056
Point to Zoom
Standard
ENGINETECH P3056 Specifications
Alloy
Hypereutectic
Bore Diameter
3.504
Bore Diameter
89.00
Clearance
0.0015
Compression Height
1.200
Oil Ring Thickness
3.00 MM
Piston Compression Ratio
9.0:1
Piston Pin Outside Diameter
0.8002
Recess
0.065 in
Second Compression Ring Thickness
1.50 MM
Top Compression Ring Thickness
1.50 MM
Hypereutectic; Coated Skirt
Enginetech pistons are manufactured with state of the art materials to match OE requirements.
Features:
Made from Hypereutectic alloy for increased strength and scuff resistance over cast pistons
Skirt coated for longer life and increased horsepower
Machined (where appropriate) for a very smooth finish
Includes a mechanism to enable oil distribution for pin lubrication to prevent them from locking up (pin starvation of oil is one of the leading causes of engine failures)
All oil return slots are chamfered to prevent stress cracking from forming at any unfinished angles
Why Choose Enginetech Pistons?
Attention California Customers - Warning: This product may expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
OEM / Interchange Numbers: H851CP
ENGINETECH Warranty Information:Stock / Standard Replacement Parts: 12 months / 12,000 miles; High Performance Parts: No WarrantyWarranty Details